ARR: change the hostname on re-routing to backend node the requests

This post has been republished via RSS; it originally appeared at: IIS Support Blog articles.

When re-routing the requests from clients to backend node(s) in a web farm, ARR is using by default the farm name as host header in the re-routed requests. But it can be configured to change that host-name, at a per-node level.

For example, let’s say that I have an IIS instance with Application Request Routing (named ARR) with two IIS instances working as backend processing nodes (named IIS-A and IIS-B). Requests are arriving at ARR node (at its IP address) as http://Public-HostName. But the sites on backend nodes are configured for hostname Internal-SiteName. So ARR should address the IIS-A/B nodes with http://Internal-SiteName, not with http://Public-HostName. How do I do that?

 

 

 

The illustrative setup

 

I’m creating a very simple web farm in ARR, adding IIS-A and IIS-B as nodes. Even if I configure IIS-A/B machine in the farm, ARR would connect to these machines by their IP addresses in the end, so we need to ensure that these names are DNS-resolvable.

  

ARR web farm setupARR web farm setup

The farm definition in applicationHost.config would end up like:

 

<configuration>
    <webFarms onDemandHealthCheck="true">
        <webFarm name="Public-HostName" enabled="true">
            <server address="IIS-A" enabled="true" />
            <server address="IIS-B" enabled="true" />
        </webFarm>
    </webFarms>
</configuration>

 

A corresponding URL Rewrite rule is being created. Since I have several farms defined on my ARR node, I am tweaking a bit the rule created by default, adding an {HTTP_HOST} condition:

 

URL Rewrite rule for the farmURL Rewrite rule for the farm

With this rule in place, it looks like this in the applicationHost.config:

 

<configuration>
    <system.webServer>
        <rewrite>
           <globalRules>
                <rule name="ARR_Public-HostName_loadbalance" enabled="true" patternSyntax="Wildcard" stopProcessing="true">
                    <match url="*" />
                    <conditions>
                        <add input="{HTTP_HOST}" pattern="Public-HostName" />
                    </conditions>
                    <action type="Rewrite" url="http://Public-HostName/{R:0}" />
                </rule>
            </globalRules>
        </rewrite>
        <proxy enabled="true" arrResponseHeader="true" />
    </system.webServer>
</configuration>

 

The rule says something like this:

  • Whatever request comes at the IP of the ARR machine, meaning whatever URL (where URL means what’s coming after the site or server name in the browser’s address bar)…
  • If the request has the host header Public-HostName
  • Then re-route the request to the server farm Public-HostName

But wait! My nodes Internal-SiteName expect as hostname. If I change the URL Rewrite rule to re-route to “Internal-SiteName”, then the ARR farm would not be recognized. I could change the farm name to “Internal-SiteName” instead, but sometimes this is not possible or desired. Is there an alternative?

 

 

 

Change host name in ARR

 

When ARR is addressing the backend nodes, to get a response for the request, it could have the hostname changed. Instead of using the farm name as the host header when addressing IIS-A/B, it could use a custom hostname, which may be defined per-node.

There are 2 steps needed, both involving configuration settings that are hidden; meaning that they are not accessible via the ARR configuration UI. We would need to manually edit the applicationHost.config or better use Configuration Editor feature from IIS Manager.

 

 

ARR farm setting

 

Firstly, change the applicationRequestRouting > protocol settings for the server farm, setting the preserveHostHeader to False. This tells ARR to not enforce placing the farm name in the host header for requests it sends to IIS-A/B. To do that:

 

  1. Select the server node in the IIS Manager, then open the Configuration Editor feature.

Configuration editorConfiguration editor

 

  1. In the Section drop-down, select the webFarms setting. Then edit the farms collection by hitting the ellipsis “...” button.

Edit collection of web farmsEdit collection of web farms

 

  1. In the list of defined web farms, select the server farm that is going to be configured.
  2. Then, expanding the applicationRequestRouting > protocol settings, set the preserveHostHeader to false.

Select farm, change settings: preserveHostHeader under protocol, under applicationRequestRoutingSelect farm, change settings: preserveHostHeader under protocol, under applicationRequestRouting

 

  1. Don’t forget to hit Apply on the right side, after closing the Collection Editor window for server farms.

Don't forget to save changesDon't forget to save changes

 

 

 

Farm node(s) setting

 

Secondly, change the hostName of the farm node(s) that are placed in the ARR server farm. You need to do that for each of the farm nodes that has to be addressed with a hostname different than the farm’s name.

 

  1. Select the server node in the IIS Manager, then open the Configuration Editor feature.

Configuration editorConfiguration editor

 

  1. In the Section drop-down, select the webFarms setting. Then edit the farms collection by hitting the ellipsis “...” button.

Edit server farms collectionEdit server farms collection

 

  1. In the list of defined web farms, select the server farm that is going to be configured.
  2. Now click the ellipsis button “...” to edit the collection of nodes pertaining to the server farm selected:

Edit nodes collection in the selected server farmEdit nodes collection in the selected server farm

 

  1. For each of the nodes in the farm, select the node in the upper list, then in the lower pane expand applicationRequestRouting and set the custom hostName setting:

Change hostName for the selected farm node, under applicationRequestRoutingChange hostName for the selected farm node, under applicationRequestRouting

 

  1. Don’t forget to hit Apply on the right side, after closing the Collection Editor windows for server farms and farm nodes collections.

Don't forget to save changesDon't forget to save changes

 

With that, if the Public-HostName is resolvable to the IP address of the ARR machine, then we can access the site from a client.

 

Test the site, the internal routing changing the host headerTest the site, the internal routing changing the host header

 

For reference, the farm definition in the applicationHost.config now looks like this:

 

<configuration>
    <webFarms onDemandHealthCheck="true">
        <webFarm name="Public-HostName" enabled="true">
            <server address="IIS-A" enabled="true">
                <applicationRequestRouting hostName="Internal-SiteName" />
            </server>
            <server address="IIS-B" enabled="true">
                <applicationRequestRouting hostName="Internal-SiteName" />
            </server>
            <applicationRequestRouting>
                <protocol preserveHostHeader="false" />
            </applicationRequestRouting>
        </webFarm>
    </webFarms>
</configuration>

 

All the best!

REMEMBER: these articles are REPUBLISHED. Your best bet to get a reply is to follow the link at the top of the post to the ORIGINAL post! BUT you're more than welcome to start discussions here:

This site uses Akismet to reduce spam. Learn how your comment data is processed.